3Com MSR 50, MSR 30 manual Display mpls rsvp-te sender, 1583

		1583
	Table 401 Description on the fields of display mpls rsvp-te rsb content
	Field	Description
	QOS service	QoS guarantee/control
	Resv Message	Reservation message received on a particular interface from next
		hop (X.X.X.X)
	Graceful Restart State	State of GR: stale or normal. Displayed as --- when not supported by
		the device.
display mpls rsvp-te sender
Syntax	display mpls rsvp-te sender [ interface interface-typeinterface-number] [ { begin
	include exclude } regular-expression ]
View	Any view
Parameter	interface interface-typeinterface-number: Specifies an interface by its type and
	number.
	: Filters output by regular expression.
	begin: Displays information beginning with a defined regular expression.
	include: Displays information that includes a defined regular expression.
	exclude: Displays information that excludes a defined regular expression.
	regular-expression: Regular expression, a string of 1 to 80 characters without
	spaces.
Description	Use the display mpls rsvp-te sender command to display RSVP-TE sender
	message information.

Example # Display the RSVP-TE sender message information on interface Ethernet 1/0.

<Sysname>	display mpls rsvp-te sender interface ethernet 1/0
Interface	Ethernet1/0;
Tunnel Dest: 29.29.29.29		Ingress	LSR ID: 19.19.19.19
LSP ID: 1		Session	Tunnel ID:	1
Session Name: Tunnel0
Previous	Hop Address: 101.101.101.1
Token bucket rate: 0.0		Token bucket size:		0.00

# Display the RSVP-TE sender message information on all interfaces.

<Sysname> display mpls rsvp-te sender
Interface: Ethernet1/0
Tunnel Dest: 19.19.19.19	Ingress	LSR ID: 29.29.29.29
LSP ID: 1	Session	Tunnel ID:	0
Session Name: Tunnel0
Previous Hop Address: 101.101.101.2
Token bucket rate: 0.0	Token bucket size:		0.00
Interface: Incoming-Interface at the		Ingress