3Com MSR 30, MSR 50 manual If-match, Undo if-match not match-criteria, Class view

1784 CHAPTER 108: DEFINING CLASS COMMANDS

if-match

Syntax if-match[ not ] match-criteria

	undo if-match [ not ] match-criteria
View	Class view
Parameters	not: Specifies to be the rule that does not match the specified matching rule.
	match-criteria: Class match rules. The values are as follow:
	Table 477 Values of matching rules for class

Value	Description
acl [ ipv6 ] { acl-number	Define ACL matching rule
name acl-name }	The acl-numberargument is the ACL number, which is in the range
	of 2000 to 5999 for IPv4 ACLs and in the range of 2000 to 3999
	and 10000 to 42767 for IPv6 ACLs.
	The acl-nameargument is the ACL name. It is a non case-sensitive
	string of 1 to 32 characters. It must begin with a to z or A to Z. It
	cannot be all in order to avoid confusion.
any	Define matching rule for all packets.
classifier tcl-name	Define QoS matching rule; the class name is tcl-name, which is the
	type of a string of characters in the range 1 to 31.
customer-vlan-id	Define customer VLAN ID matching rule; vlan-id-list is the list of
vlan-id-list	VLAN ID, and up to 8 IDs can be input. The ID is valued in the range
	1 to 4094.
destination-mac	Define destination MAC address matching rule.
mac-address
dscp dscp-list	Define DSCP matching rule; dscp-list is the list of DSCP values, and
	up to eight DSCP values can be input. The DSCP value is in the range
	0 to 63. When it is displayed in characters, its value can be af11,
	af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43,
	cs1, cs2, cs3, cs4, cs5, cs6, cs7, default, ef.

inbound-interface interface-typeinterface-number

Define inbound interface matching rule; interface-type interface-number specifies the interface by type and number.

ip-precedence	Define IP precedence matching rule; ip-precedence-list is the list of
ip-precedence-list	ip-precedence and up to eight ip precedence can be input. The
	ip-precedence is valued in the range 0 to 7.
mpls-exp exp-list	Define MPLS EXP precedence matching rule; exp-list is the list of EXP
	and up to eight EXPs can be input. The EXP is valued in the range 0
	to 7.
protocol	Define protocol matching rule; protocol-name is valued to be bgp,
protocol-name	bittorrent, citrix, cuseeme, dhcp, dns, edonkey, egp, eigrp,
	exchange, fasttrack, finger, ftp, gnutella, gopher, gre, h323,
	http, icmp, igmp, imap, ip, ipinip, ipsec, ipv6, irc, Kerberos,
	l2tp, ldap, mgcp, napster, netbios, netshow, nfs, nntp, notes,
	novadign, ntp, pcanywher, pop3, pptp, printer, rcmd, rip,
	rsvp, rtcp, rtp, rtsp, secure-ftp,secure-http, secure-ima,
	secure-irc,secure-ldap,secure-nntp,secure-pop,secure-teln,
	sip, skinny, smtp, snmp, socks, sqlnet, sqlserver, ssh,
	streamwor, sunrpc, syslog, telnet, tftp, unknown-o,
	unknown-t,unknown-u,vdolive, winmx, xwindows.