Polaroid 215EPolaview manual Remove the lamp unit screw, Install the new lamp unit

Appendix

4.Remove the lamp unit screw.

Remove the lamp unit screws (2), then grasp the lamp unit handle and carefully pull it from the LCD projector. Keep the lamp housing opening to your right. Do not touch the lamp or point the lamp opening at anyone.

lamp unit screws

coin

Warning: The lamp may be hot. Be careful when handling.

Caution: High-pressure lamps may explode if improperly handled. Danger of injury due to lamp fragments.

5.Install the new lamp unit.

Remove the 630146 lamp from the LCD projector and install a new lamp unit. (630146)

Do not drop. The impact of dropping may cause the lamp to explode.

S-VIDEO VIDEO IN L-AUDIO IN-RRS232C RGB IN AUDIO IN RGB OIUT AUDIO

lamp unit

6.Replace the lamp unit screws.

Replace the lamp unit screw and the lamp cover screws using a coin to tighten. Properly dispose of the old lamp.

7.Plug the LCD projector back in by inserting the power cord into the LCD projector AC socket, and set the MAIN power switch to ON.

8.Press POWER to turn the LCD projector ON.

9.Press MENU to display the menu.

	MENU		SET UP PROJECTOR
RGB ADJUST		FRONT/REAR			FRONT
RGB SYNC MENU		INPUT DISP			ON
>SET UP PROJECTOR		REMOTE POWER			ON
LANGUAGE		EXPANSION (VGA)			ON
	/SPRACHE /LANGUE	>LAMP TIME RESET			NO
	/IDIOMA /LINGUA	SELECT : PUSH ZorX
SELECT : PUSH ZorX
SET	: PUSH CorV	SET		: PUSH CorV
END	: PUSH MENU	END		: PUSH MENU

English 67