Kenmore 1940, 1941, 1641, 1625, 1430, 1431 manual Installing Machine Flat bed type

INSTALLING MACHINE (Flat bed type)

1.Loosen the two hinge screws under holes in the rear edge of the machine bed.

2.Raise hinge pins in the cabinet or case. Slip machine head onto pins.

3.Tighten hinge screws securely.

4, Push the speed control plug onto three-prong connector under the bed plate. Lower machine head to front cabinet flap,

gPlug machine cord into any 110-120volt wall outlet. Turn on power by pushing light and power switch.

6, Spool pins are packed in accessory box. Screw thread spool pins in place securely with a screw driver. Position nylon discs as shown in illustration.

5