BUTTON SEWING
SETTINGS
Special Stitch Dial -
Feed Dogs - Down
Zigzag Presser Foot
Zigzag Needle Plate
1.Align two holes of button with slot of presser foot and lower foot to hold the button securely.
2, Turn hand wheel manually until needle point is just above button,
3. Adjust stitch width control so needle will enter left hole of the button.
4, Turn hand wheel again by hand so
needle enters second hole. Re-
adjust stitch width if necessary, Stitch a number of times.
5.Finish sewing with an extra two inches of thread remaining; Draw these threads to reverse side of garment and tie.
BAR TACKING
SETTINGS
Special Stitch Dial -
Stitch Width Control - 2 to 4
Stitch Length Control - Red Zone
Special Stitch Modifier - Red Dot
Zigzag Presser Foot
Zigzag Needle Plate
This stitch is similar to a very short satin stitch and is used to reinforce points of strain such as corners of pockets and straps on lingerie.
Sew 4 to 6 zigzag stitches.
39
