INSTALLING MACHINE (Free-armtype)
1. To install the machine in cabinet, position
machine head on cabinet platform so that
holes on bottom of machine match those
on boards. Insert washers and screws
and tighten into place. (Fig. 1)
2. A separate base and cover is available to
carry the machine when needed. The
base must be removed when machine is
used.
To install machine in carrying case, set
machine into base, with word FRONT in
base facing you. (Fig. 2)
Place cover on machine with word
,
,
"SEARS" on handlefacing you, The case
slopes in the same direction of the ma-
chine. (Fig. 3)
Push the speed control plugonto three-
prong connector, Plug machine cord
into any !10.!20 volt wall outlet. Turn
on power by pushing light and powe_
switch. (Fig. 4)
Spool pins are packed inaccessorybox.
Screw thread spool pins in place securely
with a screw driver, Position nylon discs
asshown.in illustration.
4