WINDING THE BOBBIN
,Release clutch by pulling hand wheel or turning clutch knob toward you as shown in Fig. 1.
,Draw thread from spool through bobbin winder tension disc as shown.
3.Pull end of thread through hole in bobbin as shown.
4.Place bobbin onto bobbin winder shaft with end of thread coming from the top of the bobbin. Push
bobbin winder latch against bobbin until it clicks, Holding onto end of thread, start machine. When bobbin
is slightly filled, snip off end of thread.
5.Start machine. Wind thread until bobbin winder latch releases.
6.Push in hand wheel or tighten clutch
knob to return to stitching position, Remove bobbin,
7
