Changingmulti Purpose Needle Plate

MULTI PURPOSE NEEDLE

PLATE (Flat-bed type)

This multi purpose needle plate pro- vides a small round hole for straight

stitching and a wide oval hole for zig zag and decorative stitching.

1.Raise needle to its highest position and raise presser foot.

2.Open hand hole cover plate.

1Remove multi purpose needle plate by placing thumb under edge of plate and lifting it up and out.

*Reverse and reposition the needle plate as shown.

. Lock it into place by fixing hand hole cover plate in position.

Seam guides are printed on either side of the needle plate to aid you in guiding

your fabric. THE GUIDE LINE

EXTENDING ABOVE THE RIGHT SIDE OF THE NEEDLE PLATE IS THE "'ALL

IMPORTANT" 5/8" SEAM LINE.

The cornering guides are convenient when turning a square corner 5/8" from

the fabric edge. See next section of this book for directions.

;)0