English 17
Getting started
Getting started

How to use the remote control unit

You can use the remote control unit in place of the computer’s mouse.
Note: If PC-Card or Video mode is selected as the input signal mode for the LCD
projector, the ProMouse feature cannot be used. (This includes the Pointer, Stamp
and Line functions.)
POINTER button: Each press will change the mouse
cursor mode as shown below.
Mouse button: This can be used in place of the computer’s
mouse pointing device to move the screen cursor.
Click 1 button: This button corresponds to the button on a single-button mouse,
or to the left button on a standard mouse with two buttons.
• When this button is pressed in Stamp mode, you can mark the screen with a
stamp.
• When this button is held down and used with the mouse button in Line mode,
you can paint a line on the screen.
Click 2 button: This button corresponds to the right button on a standard mouse
with two buttons.
• When in mouse cursor mode (Pointer, Stamp, or Line), you can return to
mouse mode by pressing this button.
POWER
MODE
FREEZESHUTTER
MENU INPUT
LIGHT POINTER
MUTE VOLUME
STANDARD
d
c
b
a
a Click 2 button
b Mouse button
c Pointer button
d Click 1 button
cursor button
Mouse Pointer Stamp Line