Getting started
JPEG Viewer features
System requirements
•IBM PC/AT or compatible
•Microsoft Windows 95, Windows 98
•16MB RAM or more recommended
•2MB available hard disk space
•3.5 inch 1.44MB floppy disk drive (for installation)
•PCMCIA Type II slot
JPEG Viewer installation
1.Turn on the PC and start up Windows 95 or 98.
2.Insert the floppy disk (JPEG Viewer software) into the floppy disk drive.
3.Select [Run…] from the Windows Start menu.
4.Type in [A:\SETUP.EXE] and click [OK].
It is assumed that your 3.5 inch 1.44MB floppy disk drive is assigned as drive “A”. If not, replace “A” with the appropriate letter.
5.Follow the instructions as they appear on your PC screen.
How to make JPEG files
You can make JPEG files using the installed
JPEG Viewer software.
Capture feature
You can save captured images of your PC screen as JPEG files. (See page 51)
Note: Existing BMP or JPEG files must be converted and saved as JPEG files ideally suited to this LCD projector when projecting with this LCD projector. (See page 53)
48Polaview 215E LCD Projector User’s Guide
