Getting started
Turning the power on and off
If the MAIN power switch on the LCD projector is pressed while the cooling fan is still operating, the operating life of the projector lamp will be shortened. Be sure to follow the procedure outlined below when turning the LCD projector power supply on and off.
S- |
|
|
VIDEO | VIDEO IN |
|
| L- | |
|
|
RS232C
RGB IN
AUDIO IN |
|
RGB OUT | AUDIO OUT |
|
MAIN |
|
OFF | ON |
MAIN
d | POWER FREEZE SHUTTER | |
MUTE | VOLUME | |
| MODE | MENU INPUT |
a | STANDARD |
LIGHT POINTER |
b
c
a POWER button/STANDBY(R) | c AC socket |
ON(G) indicator | d POWER button |
| |
b MAIN power switch | (remote control) |
Turning on the power 1. Insert the power cord into the LCD projector AC socket and connect it to a properly grounded wall outlet.
2.Set the MAIN power switch on the LCD projector to ON. The STANDBY(R) ON(G) indicator lights red.
The first time you turn on the power, or whenever the STANDBY(R) ON(G) indicator is not lit, press the MAIN power switch (ON/OFF) to turn on the power.
3.Press the POWER button on the LCD projector or remote control to turn on the power.
The STANDBY(R) ON(G) indicator flashes green while the LCD projector is warming up, and then changes to solid green when the picture is projected on the screen after approximately 45 seconds.
POWER 
STANDBY (R)
ON (G)
When the power is on, the STANDBY(R) ON(G) indicator indicates the operating condition of the lamp.
Red | MAIN power on (lamp off) |
Green | Lamp is ready |
|
|
Flashing green | Warming up |
|
|
Flashing red | Cooling fan operating |
|
|
Note: When POWER is first pressed, and while the LCD projector is warming up, the “Polaroid” letter will be projected on the screen for approximately 30 seconds. During the
30Polaview 215E LCD Projector User’s Guide
