General information

 

Important safeguards

!

Caution: Please read all of these instructions before you operate your LCD

projector. Keep these instructions in a safe place for future reference.

 

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound

 

pressure level at the operator position is equal or less than 44dB (A) according to

 

ISO7779. (However, this is when the ambient temperature is less than 30°C.)

 

Electrical energy can perform many useful functions. This LCD projector has been

 

engineered and manufactured to meet applicable safety standards. But improper use

 

can result in potential electrical shock or fire hazards. In order not to defeat the

 

safeguards incorporated into this LCD projector, observe the following basic rules

 

for its installation, use, and servicing.

 

1.

Unplug the LCD projector from the power point before cleaning.

 

2.

Do not use liquid cleaners or aerosol cleaners. Use a soft dry cloth to clean the

 

 

LCD projector unit. If the unit is very dirty, wet a cloth with neutral detergent,

 

 

squeeze it tight, wipe the unit with it, and finish by wiping with a dry cloth. Do

 

 

not use a chemical duster or polisher-cleaner because it can adversely affect the

 

 

unit and peel the paint coat.

 

3.

Do not use attachments not recommended by Polaroid, as they may cause

 

 

hazards.

 

4.

Do not use the LCD projector near water; for example, near a bathtub,

 

 

washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming

 

 

pool. Never spill liquid into the LCD projector.

 

5.

Do not place the LCD projector on an unstable cart, stand, or table. The LCD

 

 

projector may fall, which may cause serious injury to a child or an adult and/or

 

 

serious damage to the unit. Use only with a cart or stand recommended by its

 

 

manufacturer as being suitable for use with an LCD projector.

 

6.

Ceiling, wall, or shelf mounting for installation should use a mounting kit

 

 

approved by the manufacturer for use with an LCD projector and should

 

 

follow the manufacturer’s instructions.

 

7.

LCD projector equipment and cart combinations should be moved with care.

 

 

Quick stops, excessive force, and uneven surfaces may cause the equipment and

 

 

cart combination to overturn.

 

8.

Slots and openings in the cabinet back and bottom are provided for ventilation.

 

 

To ensure reliable operation of the LCD projector and to protect it from

 

 

overheating, these openings must not be blocked or covered. These openings

 

 

should never be covered with cloth or other materials. The bottom opening

 

 

should not be blocked by placing the LCD projector on a bed, sofa, rug, or

 

 

other similar surface. The LCD projector should not be placed near or over a

 

 

radiator or heating vent. The LCD projector should not be placed in a built-in

 

 

installation such as a bookcase unless proper ventilation is provided.

 

9.

The LCD projector should be operated only from the type of power source

 

 

indicated on the back of the LCD projector or in the specifications. If you are

 

 

not sure of the type of power supplied to your home, consult your LCD

 

 

projector dealer or local power company.

English 7

Page 8
Image 8
Polaroid 215EPolaview manual Important safeguards