Getting started

Turning off the power 1. Press the POWER button on the LCD projector or remote control to turn off the power.

The STANDBY(R) ON(G) indicator flashes red while the LCD projector cools down, and then changes to solid red when the fan stops after about a minute.

2.Set the MAIN power switch on the LCD projector to OFF.

Positioning the LCD projector and screen

The screen should be positioned so that it is not directly touched by sunlight or room light, as this will wash out the colors of the picture, making it hard to see. When possible, close all blinds and curtains and dim the lights. Also, the projector should be at a 90° angle to the screen for the best results. To determine the distance for the desired size, please refer to the LCD projector/relative screen position chart on page 32.

Top view

 

VOLUME

 

MODE

AT

S

 

DN

 

A

 

R

D

 

MENU

 

INPUT

 

STATUS CODE

a

Side view

S-VIDEO VIDEO IN L-AUDIO IN-R

RS232C

RGB IN

AUDIO IN RGB OIUT AUDIO OUT

c b

d

e

Your LCD projector is equipped with an image reverse feature. So, in addition to front projection, you can also reverse the image for rear projection. (See page 19)

English 31

Page 32
Image 32
Polaroid 215EPolaview Positioning the LCD projector and screen, Set the Main power switch on the LCD projector to OFF