Sanyo PLC-XK2600 Computer Input, Input Source Selection RGB Computer 1/Computer, Input Menu

Computer Input

Input Source Selection (RGB: Computer 1/Computer 2)

Direct Operation

Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or COMPUTER 2 button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER 1 button

			Computer 1(RGB)
			Computer 1(Scart)
			COMPUTER 2 button
			Computer 2 (RGB)
				Input Menu
		Menu Operation
1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input
	and then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1.

OR

Use the Point ▲▼ buttons to select Computer 2 and then press the SELECT button.

3 When Computer 1 is selected, press the Point

►button to access the submenu items. Use the

Point ▲▼ buttons to select the RGB input source and then press the SELECT button.

Computer

1

Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).

27