Sanyo PLC-XK2600 owner manual Video Input, Input Source Selection Video, S-video

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video or S-videoby pressing the VIDEO or the	Remote Control
S-VIDEO button on the remote control.
Before using these buttons, correct input source should
be selected through menu operation as described below.

Menu Operation Video

VIDEO button Video

S-VIDEO button S-video

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input
	and then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Video and then
	press the SELECT button.
		When video input signal is connected to the
Video
		VIDEO jack, select Video.

Use the Point ▲▼ buttons to select Computer 1. And then press the Point ► button to access the submenu items. Use the Point ▲▼ buttons to select the S-videoand then press the SELECT button.

S-videoWhen the input source is coming from video equipment connected to the COMPUTER IN 1/S-VIDEO IN/COMPONENT IN terminal with a S-video-VGA cable, select S-video.

Note:

When the Input Search function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.45).

S-video

Computer	Press the Point ▲▼ buttons to
1	select S-video.

36