Computer Input

Screen Size Adjustment

This projector has the picture screen resize function, which enables you to customize the image size.

1

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Screen

 

and then press the Point ► or the SELECT button.

2

Use the Point ▲▼ buttons select the desired item

and then press the SELECT button .

Normal

Provide the image to fit the screen size.

Full

Provide the full screen image.

Wide (16:9)

Provide the image at the 16:9 wide screen ratio.

Zoom

Scale the image proportionally to fit the entire screen. Either side of image may go over the screen.

True

Provide the image in its original size. When the original image size is larger or smaller than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Custom

Provide the last stored aspect screen image.

Custom adj..

Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point ▲▼ buttons to choose the item you want to adjust.

Scale H/V

Adjust the Horizontal/Vertical screen

 

scale.

H&V

When set to On, the aspect ratio is

 

fixed. The Scale V appears dimmed

 

and becomes unavailable. Adjust

 

Scale H, then the screen scale is

 

automatically modified based on the

Position H/V

aspect ratio.

Adjust the Horizontal/Vertical screen

Common

position.

Save the adjusted scale or position

 

to all the inputs. Press the SELECT

 

button at Common to display a

 

confirmation box. To save the scale or

 

position, press the SELECT button at

 

Yes. When Custom is selected, the

Reset

saved scale or position is used.

Reset the all adjusted values. Press

 

the SELECT button at Reset to

 

display a confirmation box. To reset,

 

press the SELECT button at Yes.

Screen Menu

Note:

This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p,1035i or 1080i is selected in the PC System Menu (p. 28).

When True is selected in the Screen menu, Digital zoom +/- can not be selected.

Custom adj..

Note:

When no signal is detected, Normal is set automatically .

The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

34

Page 34
Image 34
Sanyo PLC-XK2600 owner manual Screen Size Adjustment