Texas Instruments MATRIX 3000, DW30 Adjusting the Image, Before You Begin f Use Auto Setup Auto

Section 3: Operation

•AUTO SOURCE: If checked, (default), the projector can automatically locate this channel when an incoming input signal matches. If not checked, the projector can

locate the selected channel only when it is directly selected via Channel on the keypad—and a change in input signal will not result in a channel change.

•LOCKED: If checked, all of the image settings for this channel are disabled. If unchecked (default), all available image settings can be adjusted as desired. You cannot use Auto Setup with a locked channel.

•PREVIOUS CHANNEL: Select this option to see or change Channel Edit settings for the previous channel in the Channel Setup list.

3.5Adjusting the Image

•NEXT CHANNEL: Select this option to see or change Channel Edit settings for the next channel in the Channel Setup list.

The most commonly used options for image adjustments are accessed through two

menus: Size and Position ( Menu 1 ) and Image Settings ( Menu 2 ), both of which

appear in the Main menu. From either of these two menus, you can change settings affecting the image from the current channel by working with the appropriate slidebars, checkboxes and pull-down lists. Exit will return to the previous menu (or to the presentation, if from the Main menu) and accept any changes you may have entered. Settings are saved with the current channel.

From your presentation, you can access any of the individual options in these menus by pressing Menu followed by the appropriate two-digit number representing their

location in the menu system. For example, press Menu 2 3 to quickly access the “Gamma” option in the Image Settings menu.

Note that for certain options, you may prefer to use a “direct key” from presentation level to go directly to a particular option without traveling through the menu system (note: available for certain display parameters only). For example, press Contrast to access the “contrast” slidebar immediately. Press Exit to return to your presentation.

NOTES: 1) To hide these “direct” slidebars, disable the” Display Slidebars” checkbox in the Menu Preferences menu. 2) To hide the entire menu system from

view, turn off the on-screen display by pressing OSD .

Before You Begin f Use Auto Setup ( Auto )

For a good and efficient first step in perfecting the image, press Auto . This initiates an automated process in which the projector quickly optimizes critical display parameters such as size, position, pixel tracking, etc., based on the type of incoming source data detected. An Auto Setup can save considerable setup time, and you can still modify the adjustments as desired using menu options described below.

013-100149-02 Rev. 1 (01/07) Christie DS+60/DW30/Matrix 3000 User’s Manual 3-19