Texas Instruments DW30, MATRIX 3000 user manual Power Connection, Warnings

Section 2: Installation and Setup

2.6Power Connection

Plug the line cord to the AC receptacle located on the right hand side of the projector and the three-pronged end into a grounded AC outlet (Figure 2.22). The input voltage to the projector must be capable of 100 – 240 VAC. See also Section 6 – Specifications for complete details on all power requirements.

The North American-rated line cord is provided with each projector. Ensure that you are using a line cord, socket and power plug that meets the appropriate local rating standards.

Always power down the projector before unplugging the AC line cord – Once you power down, wait two minutes to allow the main exhaust fan to turn off and for the lamps to cool before unplugging the projector.

WARNINGS

Do not attempt operation if the AC supply and cord are

not within the specified voltage and power range.

Wait for the cooling fans to turn off before unplugging the

projector.

Figure 2.22. AC Line Cord Connection

2-20 Christie DS+60/DW30/Matrix 3000 User’s Manual 013-100149-02 Rev. 1 (01/07)