Section 2: Installation and Setup

Figure 2.6.

Adjusting projector height

You can modify the height of the projector to remedy a slightly uneven mounting surface by adjusting the three feet threaded into the bottom chassis. Turn each foot clockwise or counter- clockwise until the project is level on all sides. (Figure 2.7)

Figure 2.7. Adjust Projector Height

NOTE: The front of the projector can be raised up to 10 degrees. (Figure 2.8)

Figure 2.8. Raised Front

Folded Optics

In rear screen applications where space behind the projector is limited, a mirror may be used to fold the optical path. See Figure 2.9. The position of the projector and mirror must be accurately set – if considering this type of installation call your dealer for assistance.

Figure 2.9. Folded Optics

013-100149-02 Rev. 1 (01/07)

Christie DS+60/DW30/Matrix 3000 User’s Manual 2-11

Page 18
Image 18
Texas Instruments MATRIX 3000, DW30 user manual Adjusting projector height, Folded Optics