Section 1: Introduction
How the projector works f The light generated by the lamp(s) is then sequentially filtered into the RGB color primaries by the spinning color wheel(s) and presented to the single chip DMD, located in the light engine, in sequence. The reflected light from the DMD chip then passes through the projection lens to the screen.
1.2 Components
Figure 1.1 How the Projector Works
Ensure you have received all the following components before using your projector.
•Wireless IR Remote (with batteries)
•Wired Remote Cable (10 ft.)
•Line Cord (North American and European)
•Computer Cable (Dsub 15 to
•
•
•User’s Manual
NOTE: For a complete list of optional components that can be used with your projector, refer to Section 6 – Specifications. Call Christie or your dealer, if required.
Christie DS+60/DW30/Matrix 3000 User’s Manual |
