Texas Instruments MATRIX 3000, DW30 Example, Broadcast Key, Backlight, Front IR / Back IR

					Section 3: Operation
DMX Channel	Function			Value
			0 – 64		Open
Base	Shutter		65 – 192		No Action
			193 – 255		Closed
Base + 1	Slider Lock		0 – 254		Locked
		255			Unlocked *
Base + 2	Input *		1 – 8		Input #
Base + 3	Channel *	1-99			Channel #
		0			Lens Down
Base + 4	Lens – Vertical * †		1 – 254		Stop
		255			Lens Up
		0			Lens Right
Base + 5	Lens – Horizontal * †		1 – 254		Stop
		255			Lens Left
		0			Negative Focus
Base + 6	Lens – Focus * †		1 – 254		Stop
		255			Positive Focus
		0			Zoom Out
Base + 7	Lens – Zoom * †		1 – 254		Stop
		255			Zoom In
		0			Power Off
Base + 8	Power *		1 – 254		No Action
		255			Power On
Base + 9	None

* Functions are only active when the Slider Lock is set to Unlocked

NOTE: It is important to ensure the channels DO NOT overlap another device.

Example:

Good

Proj1_Base = 0

Proj2_Base = 10

Proj3_Base = 20

Bad

Proj1_Base = 5

Proj2_Base = 9

Proj3_Base = 11

DEVICE NAME: This option is used to name each device; some ArtNet servers support querying for devices.

DEVICE DESCRIPTION: More information that is returned when a “device query” has been done.

Broadcast Key

Enter a checkmark if you want keypad commands sent to one projector to be relayed to all projectors in a serial network. Note that the Proj key will temporarily “override” the effect of a broadcast setting and allow you to control a specific projector when necessary. Disable the setting for all but one (any) projector in a network.

Backlight

Toggle to turn the built-in keypad backlighting on and off.

Front IR / Back IR

As needed for your application, set to “any” so that the front and/or rear IR sensor locations on the projector respond to the IR keypad. Set to “off” to disable.

013-100149-02 Rev. 1 (01/07) Christie DS+60/DW30/Matrix 3000 User’s Manual 3-39