Teledyne 3000TA-XL-EU, Trace Oxygen Analyzer Unpacking the Analyzer, Mounting the Analyzer

Trace Oxygen Analyzer Installation 3

Installation

Installation of the Model 3000TA-XL Analyzer includes:

1.Unpacking

2.Mounting

3.Gas connections

4.Electrical connections

5.Installing the Micro-Fuel Cell

6.Testing the system.

3.1Unpacking the Analyzer

The analyzer is shipped with all the materials you need to install and prepare the system for operation. Carefully unpack the analyzer and inspect it for damage. Immediately report any damage to the shipping agent.

3.2Mounting the Analyzer

The Model 3000TA-XL is for indoor use in a general purpose area. It is NOT for hazardous environments of any type.

The standard model is designed for flush panel mounting. Figure 3-1 is an illustration of the 3000TA-XL standard front panel and mounting bezel. There are four mounting holes—one in each corner of the rigid frame.

Drawing number D-62928, at the back of this manual, contains a panel cutout diagram.

On special order, a 19" rack-mounting panel can be provided. For rack mounting, one or two 3000XL series analyzers can be flush-panel mounted on the rack panel. See Appendix for dimensions of the mounting panel.

Teledyne Analytical Instruments 3-1