Teledyne 3000TA-XL-EU, Trace Oxygen Analyzer Fuse Replacement, Removing Fuse Block from Housing

Trace Oxygen Analyzer Maintenance 5

5.3Fuse Replacement

1.Place small screwdriver in notch, and pry cover off, as shown in Figure 5-2.

Figure 5-2: Removing Fuse Block from Housing

2.To change between American and European fuses, remove the single retaining screw, flip Fuse Block over 180 degrees, and replace screw.

3.Replace fuse as shown in Figure 5-3.

4.Reassemble Housing as shown in Figure 5-2.

American Fuses European Fuses

Figure 5-3: Installing Fuses

Teledyne Analytical Instruments 5-5