4 Operation | Model | |
|
|
|
|
|
|
|
|
|
4.3.3.2Installing or Changing the Password
If you want to install a password, or change an existing password,
proceed as above in Entering the Password. When you are given the oppor- tunity to change the password:
Change Password? <ENT>=Yes <ESC>=No
Press Enter to change the password (either the default TETAI or the previously assigned password), or press Escape to keep the existing pass- word and move on.
If you chose Enter to change the password, the password assignment screen appears.
T E T A I <ENT> To Proceed
or
A A A A A <ENT> To Proceed
Enter the password using the < > arrow keys to move back and forth between the existing password letters, and the Δ∇ arrow keys to change the letters to the new password. The full set of 94 characters available for pass- word use are shown in the table below.
Characters Available for Password Definition:
A | B | C | D | E | F | G | H | I | J |
K | L | M | N | O | P | Q | R | S | T |
U | V | W | X | Y | Z | [ | ¥ | ] | ^ |
_ | ` | a | b | c | d | e | f | g | h |
i | j | k | l | m | n | o | p | q | r |
s | t | u | v | w | x | y | z | { | |
} | → | ! | " | # | $ | % | & | ' | ( |
) | * | + | ' | - | . | / | 0 | 1 | 2 |
3 | 4 | 5 | 6 | 7 | 8 | 9 | : | ; | < |
= | > | ? | @ |
|
|
|
|
|
|
When you have finished typing the new password, press Enter. A verification screen appears. The screen will prompt you to retype your password for verification.
A A A A A
Retype PWD To Verify
Teledyne Analytical Instruments |
