Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen.

Note:

The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.

All measurements are approximate and may vary from the actual sizes.

A : B = 6 : 1

 

 

38.7'(11.80m)

 

 

 

32.3'(9.84m)

 

(Inch Diagonal)

 

 

 

 

21.5'(6.55m)

 

300"(wide)

300"(tele )

 

 

Max. Zoom

Min. Zoom

 

 

 

 

 

16.1'(4.90m)

 

200"

 

 

 

 

 

250

 

10.7'(3.26m)

 

 

 

150"

 

 

 

4.3'(1.30m)

 

167

 

A

100"

 

 

 

125

 

 

 

 

 

 

 

 

40"

83

 

 

 

 

 

 

 

 

 

(Center)

 

 

 

 

 

B

Screen Size

40”

 

100”

150”

200”

300”

(W x H) mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

813 x 610

 

2032 x 1524

3048 x 2286

4064 x 3048

6096 x 4572

4 : 3 aspect ratio

 

 

 

 

 

 

 

 

Zoom (max)

4.3'(1.30m)

 

10.7'(3.26m)

16.1'(4.90m)

21.5'(6.55m)

32.3'(9.84m)

 

 

 

 

 

 

 

Zoom (min)

5.1'(1.55m)

 

12.9'(3.92m)

19.4'(5.90m)

25.8(7.87m)

38.7'(11.80m)

Adjustable Foot

Projection angle can be adjusted up to 10.0 degrees with the adjustable foot.

Lift the front of the projector and push the foot lock latch on the projector.

Release the foot lock latch to lock the adjustable foot and rotate the adjustable foot to adjust the position and tilt.

To retract the adjustable foot, lift the front of the projector and push and undo the foot lock latch.

Keystone distortion of the projected image can be

Foot Lock Latch

Adjustable Foot

corrected by menu operation. (see pages 23, 35, 43,

 

 

45)

 

 

13

Page 13
Image 13
Sanyo PLC-XK2600 owner manual Installation, Positioning the Projector, Adjustable Foot, Note