3Com MSR 50, MSR 30 manual Display bgp ipv6 peer, 1229, Incomplete

1229

Table 289 Description on the fields of the display bgp ipv6 paths command

Field	Description
Path	AS_PATH attribute of the path, recording the ASs it has passed, for
	avoiding routing loops
Origin	Origin attribute of the route, which can take on one of the following
	values:
	i	Indicates the route is interior to the AS.
		Summary routes and routes defined using the network
		command are considered IGP routes.
	e	Indicates that a route is learned from the exterior gateway
		protocol (EGP).
	?	Short for INCOMPLETE. It indicates that the origin of a route is
		unknown and the route is learned by other means. BGP sets

Origin attribute of routes learned from other IGP protocols to

INCOMPLETE.

display bgp ipv6 peer

Syntax display bgp ipv6 peer [ group-namelog-info ipv4-addressverbose ipv6-address

{log-info verbose } ]

View Any view

Parameters group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. Ipv4-address: IPv4 address of a peer.

ipv6-address: Specifies the IPv6 address of a peer to be displayed.

log-info: Displays log information of the specified peer.

verbose: Displays the detailed information of the peer.

Description Use the display bgp ipv6 peer command to display peer/peer group information.

If no parameter specified, information about all peers and peer groups is displayed.

Examples # Display all IPv6 peer information.

<Sysname> display bgp ipv6 peer

BGP	Local router ID : 20.0.0.1
local AS number : 100
Total number of peers : 1			Peers in	established state : 1
Peer	V	AS MsgRcvd MsgSent	OutQ PrefRcv	Up/Down	State

20::21 4 200 17 19 0 3 00:09:59 Established