3Com MSR 50, MSR 30 manual 1093, CircuitName not enabled

1093

Table 245 Description on the fields of the debugging isis checksum-error command

Field Description

For all processes of the VPN instance vpn-instance-name , IS-IS Checksum errors debugging is on

The LSP checksum error debugging is enabled for all the IS-IS processes of the VPN instance.

For the process process-id, IS-IS Checksum errors debugging is on

The LSP checksum error debugging is enabled for the IS-IS process.

Table 246 Description on the fields of the debugging isis circuit-information command

Field	Description
% circuitName not enabled for Ipv4	IPv4 is not enabled on the interface.
	circuitName: Interface name
% circuitName not enabled for Ipv6	IPv6 is not enabled on the interface.
	circuitName: Interface name

%circuitName not enabled

Interface MTU should not be too small(< 131)

The IP is set to UP for IS-IS on interface

The IP is set to DOWN for IS-IS on interface

The IP is set to UP for ISISv6 on interface

The IP is set to DOWN for ISISv6 on interface

CIRC: Circ Up not processed. Circuit already up

CIRC: Circ Down not processed. Circuit already Down

CIRC: Join AllIS multicast address error

CIRC: Join ALLL1IS multicast address error

CIRC: Join ALLL2IS multicast address error

CIRC: Leave ALLL1IS multicast address error

CIRC:Leave ALLL2IS multicast address error

CIRC: Leave ALLIS multicast address error

CIRC : circuitName not enabled

CIRC: Circuit circuitName is on wrong state while enabling

CIRC : circuitName not enabled for Circuit Type Change

IS-IS is not enabled on the interface.

circuitName: Interface name

Interface MTU cannot be smaller than 131.

IP of the IS-IS enabled interface is up.

IP of the IS-IS enabled interface is down.

IP of the IS-ISv6 enabled interface is up.

IP of the IS-ISv6 enabled interface is down.

The interface is already UP; therefore, no more interface UP requests are processed.

The interface is already DOWN; therefore, no more interface DOWN requests are processed.

An error occurred while the interface was joining all the multicast groups.

An error occurred while the interface was joining L1 multicast groups.

An error occurred while the interface joined L2 multicast groups.

An error occurred while the interface was leaving L1 multicast groups.

An error occurred while the interface was leaving L2 multicast groups.

An error occurred while the interface was leaving all the multicast groups.

IS-IS is not enabled on the interface.

circuitName: Interface name

An error occurred when IS-IS was enabled on the interface.

circuitName: Interface name

The interface was not enabled with IS-IS when interface state changed.

circuitName: Interface name