3Com MSR 50 Idle-timeout, Undo driverbuf size, Syntax idle-timeout seconds Undo idle-timeout, 907

907

undo driverbuf size

View Terminal template view

Parameters number: Buffer size, in kilobytes (KB), ranging from 8 to 32.

Description Use the driverbuf size command to configure the size of terminal receive buffer.

Use the undo driverbuf size command to restore the default setting.

By default, the size of terminal receiver buffer is 8 KB.

Note that this command takes effect only after the template is reapplied on the interface.

Example # Set the terminal buffer size to 8 KB.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] driverbuf size 8

idle-timeout

Syntax idle-timeout seconds

undo idle-timeout

View Terminal template view

Parameters seconds: Connection idle timeout time, in seconds, ranging 10 to 3,600.

Description Use the idle-timeoutcommand to set the TCP connection idle timeout time for terminal access.

Use the undo idle-timeoutcommand to restore the default.

By default, the terminal access idle timeout time is 0 seconds; that is, the TCP connection never times out.

With the idle timeout time configured, if no data is transmitted over the terminal access connection in the specified period of time, the connection is automatically torn down.

Example # Set the terminal access idle timeout time to 1,000 seconds.

<Sysname> system-view

[Sysname] rta template abc

[Sysname-rta-template-abc] idle-timeout 1000