You can print data received as hexadecimal codes for debugging programs and files.
Display the Others screen, refer to Access the Others Screen, on page 2- 48.
If this machine does not receive any information indicating the end of data after receiving the last data, the machine waits for a certain time without printing the last page. When the preset time elapses, the machine automatically performs a form feed. If you set the time to 0, the machine does not perform a form feed until GO is manually selected.
Display the Others screen, refer to Access the Others Screen, on page 2- 48.

Printer Settings

Form Feed Timeout

1

2 Press S or T to select Form Feed Time Out and press [Enter].

3

Press < or > to set the time, 0 to

495 seconds in 5 second

increments can be selected. Press [Enter].

Others

Back

Form Feed Time-Out

Print HEX-DUMP

Form Feed Time-Out

30 sec. (0 495)

4

Press [Reset]. The Printer Basic screen displays.

Received Data Dump

1

2 Press S or T to select Print HEX- DUMP and press [Enter].

3 Press S or T to select OK and

press [Enter].

Waiting displays and then the

Printer Basic screen.

Others

Back

Form Feed Time-Out

Print HEX-DUMP

Print HEX-DUMP

Back

OK

4

5

6

Send data to the printer, dump pages are printed.

Press S or T to select GO and press [Enter].

Press [Reset]. The Printer Basic screen displays.

ADVANCED OPERATION GUIDE

2-49

Page 77
Image 77
Epson KM-2550, KM-2050, KM-1650 Form Feed Timeout, Received Data Dump, Others Back Form Feed Time-Out Print HEX-DUMP, Sec