Epson KM-2050 manual RAM Disk Operation, RAM Disk Functions, Printer Settings, Press Printer, 2-41

Printer Settings

RAM Disk Operation

RAM Disk Functions

	This machine is equipped with RAM Disk functions. The RAM Disk is a
	virtual disk unit that uses a part of the memory. If you assign a certain size
	of the memory to the RAM Disk, you can use it for electronic sorting (for
	reduction of total print time) and storage and reading of data. Also you can
	use the e-MPS function (refer to page 2-3).
	IMPORTANT: Data written to the RAM Disk is deleted when the machine
	is reset or the main power is switched off ({).
	The RAM Disk area is assigned from the user available memory.
	Consequently, printing speed may be lower or insufficient memory occurs
	depending on the RAM Disk setting value.
	The RAM Disk functions are disabled as the default setting. To use the
	RAM Disk functions, setup as follows.
1	Press [Printer].

2	Press S or T to select MENU
	and press [Enter].

Ready

GO CANCEL MENU

3	Press S or T to select RAM Disk
	Mode and press [Enter].

Menu

Page Set

Print Quality

RAM Disk Mode

4	Press S or T to select On and
	press [Enter].
	Change # displays.
5	Press [Reset].
6	Press S or T to select Yes and
	press [Enter].

The machine restarts.

RAM Disk Mode

Back

On

Off

Do you want to restart? Yes

No

ADVANCED OPERATION GUIDE 2-41