Epson KM-2050, KM-1650, KM-2550 manual Auto Sleep, Auto Clear

Press [Reset]. The Copier Basic screen returns.

Using Auto Clear, once a specified amount of time has passed after copying stops (between 10 and 270 seconds), the machine returns to the current default settings. Copies can be made continually using the same settings (e.g. copy mode, number of copies, and exposure mode) if each job is started before the Auto Clear function is activated.

Display the Machine default screen, refer to Access the Machine Default Screen, on page 3-15.

If the Auto Sleep function causes inconvenience, it is recommended to try a longer time period before disabling the function. If you disable this function, it is not displayed.

Display the Machine default screen, refer to Access the Machine Default Screen, on page 3-15.

System Settings

Auto Sleep

Use to set the machine to enter sleep mode automatically when a preset period of time of non-use elapses.

NOTE: This setting is displayed only on the inch specification machine.

1

2 Press S or T to select Auto Sleep and press [Enter].

3	Press S or T to select On or Off
	and press [Enter].

Machine Default:
	Display Contrast	:
	PIN # Change
	Auto Sleep	: On
Auto Sleep:
	Off
	* On

4

Auto Clear

1

2 Press S or T to select Auto Clear and press [Enter].

3	Press S or T to select On or Off
	and press [Enter].

Machine Default:
	PIN # Change
	Auto Sleep	: On
	Auto Clear	: On
Auto Clear:
	Off
	* On

4 Press [Reset]. The Copier Basic screen returns.

3-26 ADVANCED OPERATION GUIDE