Epson KM-1650 Auto Low Power Time, Copy Output Destination, Sleep Mode Time, Low Power Mode Time

Display the Machine default screen, refer to Access the Machine Default Screen, on page 3-15.

System Settings

2	Press S or T to select Sleep
	mode time and press [Enter].

Machine Default:		:Fast Mode
	Specific P. Type
	Orig. Direction	:Rear
	Sleep Mode Time	:30Min.

3	Press < or > to select the time
	required from 1 to 240 minutes or

1 to 120 minutes and press [Enter].

Sleep Mode Time:

30Min. 1-240Min.

4 Press [Reset]. The Copier Basic screen returns.

Auto Low Power Time

Use to set the time that elapses before Low Power mode is automatically activated.

Time that can be set:

•Inch Specification — 1 to 240 minutes (in 1 minute increments)

•Metric Specification — 1 to 120 minutes (in 1 minute increments)

1

2 Press Sor Tto select Low power time and press [Enter].

Machine Default:
	Orig. Direction	: Rear
	Sleep Mode Time	: 30Min.
	Low Power Time	: 15Min.

3	Press < or > to select the time
	required from 1 to 240 minutes or

1 to 120 minutes and press [Enter].

Low Power Mode Time:

15Min. 1-240Min.

4 Press [Reset]. The Copier Basic screen returns.

Copy Output Destination

Use to set the paper output destination with priority for copying.

Setting Item	Output Destination
Top Tray	Main body output tray
Finisher	Optional Finisher
Job Separator	Optional Job Separator

ADVANCED OPERATION GUIDE 3-21