Set Port Speed
Command Name |
| port set speed |
Description |
| Sets the port speed of a given port. |
Syntax |
| port set speed |
Parameters |
|
|
|
| Port number. (1 ~ 12) |
|
| speed |
|
| Speed of the port. Speed must either 10, 100, 1000 megabits per sec. |
Examples |
| |
|
| |
NOTES |
| If the auto negotiation mode is enabled, port speed cannot be set. First |
|
| disable the auto negotiation mode, and then set the port speed. |
Get the port duplex mode |
| |
Command Name |
| port get duplexmode |
Description |
| Gets the port Duplex mode (FULL_DUPLEX / HALF_DUPLEX ) for a |
|
| given port number . |
Syntax |
| port get duplexmode |
Parameters |
|
|
|
| Port number. (1 ~ 14) |
Examples |
| |
|
| Duplex mode of [4] port is: [half] |
|
| |
|
| Duplex mode of [23] port is: [full] |
NOTES |
| Check whether |
Set the port duplex mode |
| |
Command Name |
| port set duplexmode |
Description |
| Sets the port duplex mode (HALF_DUPLEX / FULL_DUPLEX) for a |
|
| given port number. |
Syntax |
| port set duplexmode |
Parameters |
|
|
|
| Port number. (1~12) |
|
| full half |
|
| Duplex mode of the port. Duplex mode must be either |
|
| FULL_DUPLEX or HALF_DUPLEX. |
Examples |
| |
|
| |
NOTES |
| Check whether |
Set the Lockstate of a given port |
| |
Command Name |
| port set lockstate |
Description |
| Sets the lock state of a given port to either enable or disable. If the port lock |
|
| is enabled, the switch can process the data packets only from locked MAC |
|
| addresses. Other data packets will not be processed. |
Syntax |
| port set lockstate |
Parameters |
|
|
|
| port number (1 ~ 14) |
|
| enable disable |
|
| Lock enable or disable |
Examples |
| |
|
| |
NOTES |
| Once the port is locked, all the MACs that are learned on that port are |
|
| treated as static MACs. This means the switch can process the packets |
|
| from those MACs only. It will discard all packets from other MACs. |
|
| Because the MAC is set for that port, it will only be addressable via that |
|
| port. |
Rev. 051208 | page 114 of 152 |