Gigabyte 7014 user manual Show all configuration parameters, System Restart, page 106 of

Show all configuration parameters

Command Name	system show config
Description	Displays the software version, the mac address, and status of gigabit ports.
Syntax	system show config
Parameters	None
Example	N-TRON/Admin#[32]system/show> config
	System Configuration	:
	Product Configuration	: 7014FX2
	Software Version	: 1.1.8
	MAC Address	: 00:07:af:ff:e5:60
	IP Configuration Mode	: manual
	System IP Address	: 192.168.1.244
	Subnet Mask	: 255.255.255.0
	Gateway Address	: 192.168.1.1
	System Name	: N-TRON Switch
	System Contact	: N-TRON Admin
	System Location	: Mobile, AL 36609
	System Up Time	: 0 days:0 hours:28 mins:43 secs
	Total Number of Ports	: 14
	Port # 1 - 12	: 10/100 Mbps Copper and/or
		100 Mbps Fiber
	Port # 13	: Gigabit Transceiver
	Port # 14	: Gigabit Transceiver
Notes
Show all configuration parameters related to SNMP manager
Command Name	system show snmpinfo
Description	To show all the configuration parameters related to snmp manager
Syntax	system show snmpinfo
Parameters	None
Example	N-TRON/Admin#[33]system/show> snmpinfo
	System SNMP Configuration :
	IP Address - Trap Station#1		: 192.168.1.2
	IP Address - Trap Station#2		: Value Not Configured
	IP Address - Trap Station#3		: Value Not Configured
	IP Address - Trap Station#4		: Value Not Configured
	IP Address - Trap Station#5		: Value Not Configured
	SNMP Get Community Name		: public
	SNMP Set Community Name		: private
	SNMP Trap Community Name		: public
Notes
System Restart
Command Name	system restart
Description	To restart (reboot) the device
Syntax	system restart
Parameters	None
Example	N-TRON/Admin#[1]> system restart
	Do you Want to Restart	the System Now: [y/n]y
	Do you Want to Save the Configuration: [y/n]y
	................
	................
Notes

Rev. 051208 page 106 of 152