Gigabyte 7014 user manual User Management Commands, Show System Users, Add a System User

User Management Commands

Show System Users

Command Name	system show users
Description	Shows a list of users and their permissions on the system
Syntax	system show users
Parameters	None
Example	N-TRON/Admin#[1]> system show users
	Serial	Username	Access Permissions
	------	--------	------------------
	1	admin	admin
	2	ntron	user
NOTES
Add a System User
Command Name	system add user
Description	To add a user to the system
Syntax	system add user <username> [access permission]
Parameters	Username
	A string of at least 3 characters and no more then 15 characters
	Access permission
	“user” or “admin” permission rights
	Password
	Administrator will be prompted for a password of 3 to 15
	characters in length.
Example	N-TRON/Admin#[1]> system add user ntron user
	Enter User Password :****
NOTES	Users with User permissions can not make changes to the switch, but
	can view configuration settings and port settings. Users with admin
	permissions have the ability to change settings on the switch and can
	add more users. There is a limit of 5 users per switch with any
	combination of permissions.
Modify a User’s Access Permissions
Command Name	system modify useraccess
Description	To change a user’s permissions
Syntax	system modify useraccess <username> <access permission>
Parameters	Username
	The user’s username that is to be modified.
	Access permission
	“user” or “admin” permission rights
Example	N-TRON/Admin#[1]> system modify useraccess ntron admin
NOTES	User must have admin permissions to use this command

Rev. 051208 page 107 of 152