Gigabyte 7014 Show port statistics, Get total number of good frames received, eg.1, eg.2

Show port statistics

Command Name	port show stats
Description	This command is used to get the port statistics of a given port for all
	available counters.
Syntax	port show stats <port-no>
Parameters	port-no
	Port number. (1 ~ 14).
Examples	N-TRON/Admin#[1]> port show stats 5
	--------------------------------------------
	COUNTER TYPE	:[]
	--------------------------------------------
	COUNTER NAME	COUNTER VALUE
	--------------------------------------------
	byteFrames	28072
	64 byte Frames	272
	64-127 byte Frames	24
	128-255 byte Frames	43
	256-511 byte Frames	43
	512-1023 byte Frames	0
	1024-1518 byte Frames	0
	1519-1522 byte Frames	0
	… … … …
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Get total number of good frames received
Command Name	port get totalgoodframes
Description	Gets the total number of good frames received on the switch.
Syntax	port get totalgoodframes
Parameters	None
Examples	eg.1
	N-TRON/Admin#[1]> port get totalgoodframes
	Total no of good frames: [12456]
	eg.2
	N-TRON/Admin#[1]> port get totalgoodframes
	Total no of good frames: [56732]
NOTES
Get port speed
Command Name	port get speed
Description	Gets the port speed in megabits.
Syntax	port get speed <port-no>
Parameters	port-no
	Port number. (1 ~ 14).
Examples	N-TRON/Admin#[1]> port get speed 4
	port speed of port no [4] is : [10]
	N-TRON/Admin#[2]> port get speed 5
	port speed of port no [5] is : [100]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)

Rev. 051208 page 113 of 152