Gigabyte 7014 VLAN - Port Based, Continued…, See VLAN Configuration Examples section, page 42 of

VLAN – Port Based, Continued…

Now the page will display the new VLAN and moved ports P1-P6 from the default VLAN down to vlan2 that was just created.

To delete or remove VLANs that are no longer wanted simply click on the Delete button on the main Port Based VLAN page. That button will load the page where the user can enter the VLAN ID that he or she wishes to delete.

(See VLAN Configuration Examples section)

Note:

1.When implementing overlapping VLANs, RSTP can only be enabled on one of the VLANs that is overlapping others. RSTP can not be implemented on a VLAN that contains other VLANs within that one. Changing anything on a VLAN will turn on RSTP on all VLANs as a precautionary measure.

2.All N-Ring ports must be on the same tagged VLAN.

3.VID=1 has to be Admit=ALL, and cannot be tagged only.

Rev. 051208 page 42 of 152