Gigabyte 7014 user manual Vlan Related Commands, Add Vlan Entry, Show List of Configured VLANs

VLAN Related Commands

Add VLAN Entry

Command Name	vlan add
Description	To create a Port based Virtual LAN
Syntax	vlan add <vlan id> <mgmt port>
	<at least one of: [-untagged <port mask>] or [-tagged <port mask>]>
	[-name <vlan name>]
	[-admit <tagged-onlyall>] [-mirror <port-no>]
Parameters	vlan-id
	Unique vlan id (2 ~ 4094).
	mgmt port
	Either 1 or 0. ‘1’ sets this vlan as a manage ment vlan.
	vlan name
	Unique vlan name, which can be used to identify the
	group. The name may include characters and numbers,
	but should start with an alphabetic. Maximum number of
	characters must not exceed 25.
	-untagged port mask
	List of ports that are to be included under this VLAN. Commas
	can be used to separate individual ports (2,5,9) and the range can
	be specified using a hyphen (10-15). The port numbers cannot
	exceed the maximum number of ports on the board.
	-tagged port mask
	Tagged port mask values can be specified in the same way as that of
	an untagged port mask.
	-admit
	Allow tagged-only or all (untagged and tagged) packets.
	port-no
	Optional parameter. Port number that data should be mirrored to.
Examples	N-TRON/Admin#[1]> vlan add 2 1 –untagged 1-12 –name vlan2 –
	admit all
	N-TRON/Admin#[2]> vlan add 3 1 –tagged 13-24 –name “vlan 3” –
	admit tagged-only
NOTES	Ensure that the ports included in the tagged port list do not exist in the untagged
	ports-list field. Changing anything on a VLAN will turn on RSTP on all VLANs as
	a precautionary measure.
Show List of Configured VLANs
Command Name	vlan show config
Description	Displays the list of configured VLANs
Syntax	vlan show config
Parameters	None
Examples	N-TRON/Admin#[1]> vlan show config
NOTES	It displays the information of the default vlan if no vlan is configured.

Rev. 051208 page 123 of 152