Gigabyte 7014 N-Ring Related Commands, N-Ring get agingtime, N-Ring set agingtime, Ring or all

N-Ring Related Commands

N-Ring get agingtime

Command Name	n-ring get agingtime
Description	To display the N-Ring Agingtime of the device
Syntax	n-ring get agingtime
Parameters	None
Example	N-TRON/Admin#[1]> n-ring get agingtime
	N-Ring Aging Time : 20
NOTES	Default: 20 seconds and is separate from the Bridging Aging Time.
	N-Ring Aging time is used for the whole switch if the switch is an
	N-Ring Manager or becomes an active N-Ring Member.
N-Ring set agingtime
Command Name	n-ring set agingtime
Description	Sets the aging time for dynamically learned MAC addresses of the chipset
	when in N-Ring Manager or Active N-Ring Member modes.
Syntax	n-ring set agingtime <aging-time>
Parameters	aging-time
	aging time to be set for N-Ring.
	Minimum N-Ring agingtime can be 5 seconds.
	Default N-Ring aging time is 20 seconds.
	Maximum aging time is 1000000 seconds.
Examples	N-TRON/Admin#[1]> n-ring set agingtime 200
NOTES	Is separate from the Bridging Aging Time. N-Ring Aging time is used for
	the whole switch if the switch is an N-Ring Manager or becomes an active
	N-Ring Member.
N-Ring get webfault
Command Name	n-ring get webfault
Description	To display the browser N-Ring fault reporting mode.
Syntax	n-ring get webfault
Parameters	None
Example	N-TRON/Admin#[1]> n-ring get webfault
	N-Ring faults will be shown on N-Ring Web Pages only
NOTES
N-Ring set webfault
Command Name	n-ring set webfault
Description	Sets the browser N-Ring fault reporting mode.
Syntax	n-ring set webfault <ringall>
Parameters	Ring or all
Examples	N-TRON/Admin#[1]> n-ring set webfault all
	N-Ring faults will be shown on All Web Pages
NOTES

Rev. 051208 page 135 of 152