Gigabyte 7014 user manual Port Manager Commands, Get the link state of a given port

Port Manager Commands

Get the link state of a given port

Command Name	port get linkstate
Description	This command is used to get the present link state of a given port.
	Whenever there is an active connection, link state (operational state) is
	up; else link state is down.
Syntax	port get linkstate <port-no>
Parameters	port-no
		Port number. (1 ~ 14).
Examples	N-TRON/Admin#[1]> port get linkstate 3
	Link state of [3] port is: [down]
	N-TRON/Admin#[2]> port get linkstate 1
	Link state of [1] port is: [up]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Get admin status of the port
Command Name	port get adminstatus
Description	This command is used to the get present adminstatus of a given port.
	Adminstatus is used to enable or disable the port operations even though
	there are active connections.
Syntax	port get adminstatus <port-no>
Parameters	port-no
		Port number. (1 ~ 14).
Examples	N-TRON/Admin#[1]> port get adminstatus 4
	Admin state of [4] port is: [enable]
	N-TRON/Admin#[2]> port get adminstatus 9
	Admin state of [9] port is: [disable]
NOTES	Check whether port-nois in the valid range. (1 ~ 14)
Set admin status of a port
Command Name	port set adminstatus
Description	This command is used to set the adminstatus of a given port to enable or
	disable. If the adminstatus is disabled, the port cannot process the received
	packets.
Syntax	port set adminstatus <port-no><enable disable>
Parameters	1.	port-no
		Port number. (1 ~ 14).
	2.	adminstatus
		adminstatus is either enable or disable.
Examples	N-TRON/Admin#[1]> port set adminstatus 4 enable
	N-TRON/Admin#[2]> port set adminstatus 8 disable
NOTES	Check whether port-nois in the valid range. (1 ~ 14)

Rev. 051208 page 112 of 152