Gigabyte 7014 user manual Bridging Multicast Addresses, …

Bridging – Multicast Addresses, Continued…

After adding a Multicast Group Address it will appear on the main list and will show the associated ports that go along with that address.

Following the Delete button on the page above, the administrator will be presented with a list of Multicast Group Addresses that are configured on the switch. Using the pull-down menu the administrator should select the desired port to be removed. Then click on the Delete button at the bottom of the page.

Note: If there are multiple ports on different VLANs, the 7014 will apply the static multicast address to the lowest VLAN-ID that is associated with one of the ports assigned to the static multicast address. So if the lowest VLAN-ID contains all the ports assigned to the static multicast address (an umbrella VLAN), it will function for all those ports with no problems. This can be achieved with overlapping VLANs.

Rev. 051208 page 48 of 152