Gigabyte 7014 user manual Ring get interval, Ring set interval, Ring get mode, Ring set mode

N-Ring get interval

Command Name	n-ring get interval
Description	To display the Self-Health Packet interval and missed threshold.
Syntax	n-ring get interval
Parameters	None
Example	N-TRON/Admin#[1]> n-ring get interval
	Self Health Packet interval is 1
	Maximum Missed Packets is 2
NOTES	Default: interval=1, missed=2
N-Ring set interval
Command Name	n-ring set interval
Description	Sets the Self-Health Packet interval and missed threshold.
Syntax	n-ring set interval <interval> [missed]
Parameters	interval and missed
Examples	N-TRON/Admin#[36]n-ring/set> n-ring set interval 1 3
	Self Health Packet interval set to 1
	Maximum Missed Packets set to 3
NOTES	The interval is in 10 millisecond increments. The missed threshold sets
	how many missed Self-Health Packets constitute a fault.
N-Ring get mode
Command Name	n-ring get mode
Description	To display the current N-Ring Mode.
Syntax	n-ring get mode
Parameters	None
Example	N-TRON/Admin#[1]> n-ring get mode
	N-Ring Mode : AutoMember
	Port Set	: 100
	VLAN ID :	1
	Tagging :	Untagged
NOTES	Do not use Trunking on a switch that is directly in an active N-Ring.
N-Ring set mode
Command Name	n-ring set mode
Description	Sets the current N-Ring Mode. Sets ring ports, vlanid and tagging, if manager mode.
Syntax	n-ring set mode <managerautomemberdisable> [-rp <100GB>] [-vlanid <id>] [-
	tagging <taggeduntagged>]
Parameters	managerautomemberdisable
	N-Ring mode
	AE
	N-Ring ports, 100 for ports FX1 and FX2, while GB for ports GB1 and GB2
	id
	Unique vlan id (1 - 4094). Default is 3333.
	taggeduntagged
	Determines whether the N-Ring ports are members of the VLANs
	Tagged or Untagged ports. Default is Tagged.
Examples	N-Ring Mode set to automember
	................
	................
	.
	Device is Going for Reboot....
	N-TRON/Admin#[3]> n-ring set mode manager -rp GB
	N-Ring Mode set to manager
	Port Set to be used is GB

Rev. 051208 page 136 of 152