Gigabyte 7014 CLI Commands, Clear, The entire screen will be cleared…, “?” Help, command ?

CLI Commands

Clear

Command Name	clear
Description	Clears the screen. The cleared screen shows only the command-line
	prompt and the cursor.
Syntax	clear
Parameters	None
Examples	N-TRON/Admin#[1]> clear
	The entire screen will be cleared…
	…
	…
	…
	…
	N-TRON/Admin#[2]>
NOTES
“?” (HELP)
Command Name	“?”
Description	Without <keywords>, this command will list all the available
	commands. This is the same as the default behavior of the help
	command.
	If <keywords> is specified and if they match a specific command, the
	usage of the command will be displayed; otherwise, if <keywords>
	matches the prefix of a command(s), the name of the command(s) will
	be listed.
	If ? is preceded by another ?, the usage and description of this command
	will be displayed.
Syntax	?
	<matched keywords> ?
	<command> ?
Parameters	matched keywords
	Prefixes of the command.
	Command
	Name of the any command supported by CLI
Examples	N-TRON/Admin#[1]> ?
	The above command displays all the available commands.
	N-TRON/Admin#[2]> abcd ?
	Unknown command supplied as parameter.
	N-TRON/Admin#[3]> clear ?
	Usage: clear
	N-TRON/Admin#[4]> system ?
	System/
	N-TRON/Admin#[5]> ? ?
	This displays the usage of “ ?” as shown below
	[<keywords>] ?
NOTES

Rev. 051208 page 97 of 152