Epson KM-2550 Quick Copy/Proof-and-Hold, Select User Name tom Select JOB List, Printer Settings

Printer Settings

Quick Copy/Proof-and-Hold

1

2

Quick Copy and Proof-and-holdare selected from the printer driver.

When a Quick Copy job is received, the machine stores it in memory until the user enters the number of copies required and prints the job.

When a Proof-and-holdjob is received, the machine prints one set and then stores the job in memory. The user can check the proof, change the number of copies if required and print the remaining sets.

NOTE: For information about the printer driver options, refer to the KX Printer Driver Operation Guide.

Access e-MPS,refer to Access e-MPS, on page 2-3.

Press S or T to select Quick
	e-MPS
Copy and press [Enter].
		Back
		Quick Copy
		Private/Stored

3	Press S or T to select the user
	name specified by the printer
	driver and press [Enter].
4	Press S or T to select the job
	name specified by the printer
	driver and press [Enter].
5	Use the numeric keys to enter the
	number of copies and press

[Enter].

Printing commences.

Deleting Quick Copy/Proof-and-Hold

Select User Name

tom

Select JOB

List

Select User Name		: 001
	Copies
	Delete

	Quick copy/proof-and-hold jobs stored in memory are deleted
	automatically when the power is switched off. Use the following
	instructions to delete a job manually.
1	Select the job to delete, refer to Quick Copy/Proof-and-Hold, on page 2-4.

2	Press Sor Tto select Delete and
	press [Enter].

Select User Name

Copies : 001

Delete

2-4 ADVANCED OPERATION GUIDE