The Resource Protect Mode protects the resource data such as downloaded fonts and macros and memorizes the PCL resources even if the emulation mode is switched off. If you select Permanent, temporary resources are not protected. If you select Perm/Temp, temporary resources are protected.
Display the Others screen, refer to Access the Others Screen, on page 2- 48.
Printer Settings
Printer Function Resetting
| This function resets the printer’s temporary settings (such as the current |
| page orientation and font) to the default settings. |
1 | 48.Display the Others screen, refer to Access the Others Screen, on page 2- |
2 | Press S or T to select Printer |
| Reset and press [Enter]. |
Others
Form Feed Time-Out
Print HEX-DUMP
Printer Reset
3 Press S or T to select OK and
press [Enter].
The printer functions are reset.
Printer Reset
Back
OK
Resource Protect Mode
1
2 Press S or T to select Resource Prot and press [Enter].
Others
Print HEX-DUMP
Printer Reset
Resource Prot.
3 | Press S or T to select Off, |
|
|
| |
Resource Prot. | |||||
Permanent or Perm/Temp and | |||||
|
| Back | |||
| press [Enter]. |
|
| ||
|
|
| Off | ||
4 |
|
|
| Permanent | |
|
|
| |||
Press [Reset]. The Printer Basic screen displays. |
ADVANCED OPERATION GUIDE |