Epson KM-1650 manual Access the Copy Default Screen, Enter Pin Code using # key, System Settings

System Settings

Access the Copy Default Screen

Use the following procedure to access the Copy Default screen.

1

2

Press [System Menu / Counter].

Press S or T to select Copy default and press [Enter].

System Menu / Counter:

Print Report

Job Accounting

Copy Default

3	Use the keypad to enter the 4 digit
	management code.

Enter Pin Code using # key.

NOTE: The factory default management code varies for each model:

16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500. The four-digit management code can be changed. For further information refer to Administrator Management Code Change, on page 3-25.

If the code is accepted, the Copy Default screen displays.

Copy Default:
	End	:Manual
	Exposure Mode
	Orig Quality	:Text+Photo

4	Change the options to the default settings required using the instructions
	starting on page 3-4.

NOTE: An * (asterisk) against a setting indicates the current setting.

ADVANCED OPERATION GUIDE 3-3