Epson KM-2550, KM-2050, KM-1650 manual Access the Job Accounting Screen, Enter Pin Code using # key

Job Accounting

Access the Job Accounting Screen

Use the following procedure to display the Job Accounting screen.

1

2

Press [System Menu / Counter].

Press S or T to select Job Accounting and press [Enter].

System Menu / Counter:

Counter Check

Print Report

Job Accounting

3	Use the keypad to enter the 4 digit
	management code.

Enter Pin Code using # key.

NOTE: The factory default management code varies for each model:

16 ppm model = 1600, 20 ppm model = 2000, and 25 ppm model = 2500. The four-digit management code can be changed. For further information refer to Administrator Management Code Change, on page 3-25.

If the code is accepted, the Job Accounting screen displays.

Job Accounting: [ On ]

End

Job Accounting Total

Each Job Accounting TL

4 Setup the options required using the instructions starting on page 4-4.

ADVANCED OPERATION GUIDE 4-3