3Com MSR 50 Timer dial-interval, Syntax timer dial-interval seconds Undo timer dial-interval

2611

View Voice view

Parameter line-number:Voice subscriber line number.

Description Use the subscriber-linecommand to enter analog FXS, FXO, and E&M, or digital E1/T1 voice subscriber line view.

Use the subscriber-lineline-numbercommand to enter the voice subscriber line view. For example, if line-numberis an FXS voice subscriber line, the system will enter the FXS voice subscriber line view; if line-numberis an analog E&M voice subscriber line, the system will enter analog E&M voice subscriber line view.

Example # Enter the view of the voice subscriber line 1/0 in voice view.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0]

timer dial-interval

Syntax timer dial-interval seconds

undo timer dial-interval

View FXS/FXO/E&M voice subscriber line view

Parameter seconds: Maximum interval in seconds for dialing the next digit, in the range of 1 to 300.

Description Use the timer dial-intervalcommand to configure the maximum interval for dialing the next digit.

Use the undo timer dial-intervalcommand to restore the default setting.

By default, the maximum interval for dialing the next digit is 10 seconds.

This timer will restart each time the subscriber dials a digit and will work in this way until all the digits of the number are dialed. If the timer expires before the dialing is completed, the subscriber will be prompted to hook up and the call is terminated.

Example # Set the maximum duration waiting for the next digit on voice line 1/0 to 5 seconds.

<Sysname> system-view [Sysname] voice-setup [Sysname-voice] subscriber-line 1/0

[Sysname-voice-line1/0] timer dial-interval 5