3Com MSR 50, MSR 30 manual L2vpn-family, Syntax l2vpn-family, 1663

1663

Description Use the display mpls static-l2vccommand to display information about static VCs configured on the router.

If you specify an interface, the command displays only information about static

VCs configured on the CE interface.

Example # Display information about all static VCs configured on the router.

<Sysname> display mpls static-l2vc
total connections: 1,		1 up, 0 down
ce-intf	state	destination	tr-label	rcv-label tnl-policy
Serial2/0	up	3.3.3.9	100	200	policy1
Table 441 Description on the fields of the display mpls static-l2vc command
Field	Description
total connections	Statistics about connection, including the total number of connections,
	number of connections that are up, and number of connections that
	are down
ce-intfe	CE interface
State	Status of the VC
destination	Destination IP address
tr-label	Outgoing label
rcv-label	Incoming label
tnl-policy	Name of the tunneling policy

# Display information about static VCs configured on interface Serial 2/0.

<Sysname> display mpls static-l2vc interface Serial 2/0

***CE-interface	: Serial2/0 is up
VC State	: up
Destination	: 3.3.3.9
Transmit-vpn-label	: 100
Receive-vpn-label	: 400
Tunnel Policy	: policy1
Tunnel Type	: lsp
Tunnel ID	: 0x226013

Table 442 Description on the fields of display mpls static-l2vc interface

Field	Description
CE-interface	Name of the CE interface
VC State	Status of the VC
Destination	Destination IP address
Transmit-vpn-label	Outgoing label
Receive-vpn-label	Incoming label
Tunnel Policy	Name of the tunneling policy
Tunnel Type	Type of the tunnel
Tunnel ID	ID of the tunnel

l2vpn-family

Syntax l2vpn-family