3Com MSR 30, MSR 50 manual Peer route-policy BGP-VPNv4 subaddress family view, Peer upe

1706 CHAPTER 98: MPLS L3VPN CONFIGURATION COMMANDS

peer route-policy (BGP-VPNv4 subaddress family view)

Syntax peer { group-name ip-address } route-policyroute-policy-name { export import }

undo peer { group-name ip-address } route-policyroute-policy-name { export import }

View BGP-VPNv4 subaddress family view

Parameter group-name: Name of the peer group, a string of 1 to 47 characters. ip-address: IP address of the peer.

route-policy-name: Name of the routing policy, a string of 1 to 19 characters.

export: Filters the routes to be advertised.

import: Filters the received routes.

Description Use the peer route-policycommand to apply a routing policy to a peer or peer group.

Use the undo peer route-policycommand to remove the application.

By default, no routing policy is applied to a peer or peer group.

Example # In BGP-VPNv4 subaddress family view, apply routing policy test-policy to peer group test to filter the received routes.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpnv4

[Sysname-bgp-af-vpnv4] peer test route-policy test-policy import

peer upe

Syntax peer { group-name ip-address } upe

undo peer { group-name ip-address } upe

View BGP-VPNv4 subaddress family view

Parameter group-name: Name of the peer group, a string of 1 to 47 characters.

ip-address: IP address of the peer.

Description Use the peer upe command to configure a BGP peer or peer group as an HoVPN UPE for a BGP-VPNv4 subaddress family.

Use the undo peer upe command to remove the configuration.